Amplifier for sale - Mark Levinson No. 320S

Amplifier Description: Amplifier for sale - Mark Levinson No. 320S

Hi, and thanks for looking! This is a Mark Levinson No. 320S preamplifer. This unit is in excellent shape, and has had only one owner since new. It comes with the matching remote and an aftermarket braided power cable. It has been audio tested with the matching Mark Levinson No. 432 Amplifier for sale in my other auctions. The Specs (from the Mark Levinson site) are as follows:
Connector Complement: 3 balanced (female XLR) stereo inputs
4 single-ended (Mark Levinson-RCA) stereo inputs
1 balanced (male XLR) stereo main output
1 single-ended (Mark Levinson-RCA) stereo main output
2 single-ended (Mark Levinson-RCA) stereo record outputs
2 8-pin RJ-45 connectors for Link communication
1 6-pin modular RJ-11 connector for RS-232 communication
1 3.5mm mini-jack for trigger output
1 3.5mm mini-jack for IR input
1 phono ground terminal
1 IEX-standard AC mains connector Crosstalk: less than 90dB (any input to any output, input terminated) Dimensions: width: 17.75" (45.1cm)
height: 2.915" (7.4cm)
depth: 14.04" (35.7cm) Frequency Response: 10Hz-40kHz: �0.2dB Gain: 0, 6, 12, or 18dB (line-level stage) Gain Resolution: 1.0dB increments up to 23.0dB on front panel (-57dB)
0.1dB increments above 23.0dB on front panel (-57dB) Input Impedance: 100k Input Overload: when gain is set to +18dB: 1.6V on XLR, 0.8V on RCA
when gain is set to +12dB: 3.3V on XLR, 1.6V on RCA
when gain is set to +6dB: 6.6V on XLR, 3.3V on RCA
when gain is set to 0dB: 13.2V on XLR, 6.6V on RCA Operating Voltage: 100V, 120V, 220V or 230V AC power at 50 or 60Hz (preset) Output Impedance: less than 50ohms Power Consumption: 50 watts maximum Residual Noise: 20Hz to 20kHz, input terminated: less than -94dBV Shipping Weight: 30lb (14kg) THD + Noise: less than 0.001% Volume Control Range: 80.0dB (maximum)

Amplifier Pictures: Amplifier for sale - Mark Levinson No. 320S